FB3G175-2ALH-7A
| Nominal Voltage | VAC | 230 |
| Current draw | A | 1.2±10% |
| Speed(RPM) | min-1 | 2850±5% |
| Power consumption | W | 35±10% |
| Max. Air Flow | CFM / m3 /H | 320.3/544.3 |
| Max. Static Pressure | In.wg /Pa | 1.3/325 |
50pcs
Whisper-quiet operation is the defining superpower of the FB3G175-2ALH-7A backward curved centrifugal fan, which registers only 59.4 dB(A) at full speed — a sound level below normal conversation, making it ideal for medical equipment, laboratory cabinets, office air handling and any installation where acoustic comfort is non-negotiable. Equally impressive is its ultra-low power draw: just 35 W from a 230 VAC supply (operating range 184–277 V), proving that high aerodynamic performance and energy efficiency can coexist. This 175 mm impeller model delivers a maximum airflow of 320.3 CFM (544.3 m3/h) and a static pressure of 1.3 in.wg (325 Pa), achieved through a glass-fiber reinforced polypropylene impeller and a precision die-cast aluminum housing that together minimize vibration and turbulence. The heart of the unit is a BLDCEC72 electronically commutated motor with a 72 mm rotor, offering stepless 0–10 V speed control and integrated overload protection for seamless integration into smart HVAC systems. Electrical safety is assured by Class B insulation and an IP42 protection rating, while the maintenance-free ball bearing system provides an expected life of 40,000 hours at 40°C. Typical applications include air purifiers, fan coil units, heat recovery ventilators, laboratory fume hoods and compact air-conditioning modules. The fan carries CE, RoHS and ErP 2015 compliance, and the 20AWG, 500 mm cable ensures straightforward installation. FANOVA's OEM/ODM capability allows customized cable lengths, connectors and control interfaces to match your exact design requirements.
The FB3G175-2ALH-7A is a backward curved centrifugal fan engineered around a 175 mm diameter impeller molded from glass-fiber reinforced polypropylene. This composite material delivers an excellent strength-to-weight ratio, resists chemical attack and moisture ingress, and keeps rotating mass low so that the motor can accelerate quickly and run with minimal vibration. The impeller features a precisely balanced array of backward curved blades — a geometry chosen to promote smooth, laminar airflow with high static efficiency and a naturally steep pressure curve that resists system-resistance fluctuations. Each impeller is dynamically balanced to ISO 1940 G6.3 grade before assembly, a step that suppresses the tonal noise components often heard in lower-quality fans. The impeller is enclosed in a die-cast aluminum endcap and housing, which provides rigid dimensional stability, effective heat dissipation for the motor electronics and a high-quality surface finish. The motor is a BLDCEC72 outer-rotor electronically commutated design with a 72 mm rotor diameter, combining brushless reliability with the controllability of digital electronics. It accepts a 230 VAC nominal supply across an unusually wide 184–277 V range, so it tolerates the voltage sags and swells common on real-world distribution networks without derating. At 2850 RPM the fan draws only 1.2 A and 35 W while producing 320.3 CFM (544.3 m3/h) of free airflow and up to 1.3 in.wg (325 Pa) of static pressure — a performance point that suits long duct runs, dense filters and multi-outlet manifolds. Speed is controlled through a 0–10 V DC analog input (PWM options available on request), giving smooth, stepless adjustment from standstill to maximum speed; the integrated control electronics also provide soft-start, locked-rotor protection and over-temperature shutdown. Electrical insulation is Class B rated, and the fan is protected to IP42 against dust and dripping water, making it suitable for indoor air-handling equipment. The bearing system uses maintenance-free ball bearings rated for 40,000 hours at 40°C ambient, with a mechanical construction that includes a dynamically balanced rotor, corrosion-resistant shaft and precision end-cap fit to keep vibration and acoustic output low throughout the service life. The electrical interface is a 20AWG, 500 mm cable with flying leads; custom lengths, connectors and terminal blocks can be specified for OEM volumes. Acoustic performance is a key design target: the combination of backward curved blade geometry, low rotational speed relative to output and vibration-isolated motor mounting yields a sound pressure level of just 59.4 dB(A) at one meter, below the level of normal conversation. The fan complies with CE, RoHS and ErP 2015 requirements and is manufactured under FANOVA's ISO 9001 quality system, with 100% end-of-line testing of airflow, power, current and noise. Typical applications include air purifiers, laboratory fume hoods, heat recovery ventilators, fan coil units, medical equipment and compact air-conditioning modules where quiet, efficient and controllable airflow is essential.
| AC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G175-2ALH-7A | |
| Model | BLDCEC72 | |
| Nominal Voltage | VAC | 230 |
| Voltage range | VAC | 184~277 |
| Current draw | A | 1.2±10% |
| Speed(RPM) | min-1 | 2850±5% |
| Power consumption | W | 35±10% |
| Sound Pressure Level | dB(A) | 59.4±5% |
| Max. Air Flow | CFM / m3 /H | 320.3/544.3 |
| Max. Static Pressure | In.wg /Pa | 1.3/325 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G175-2ALH-7A delivers 544.3 m3/h at 325 Pa while drawing only 35W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 175mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 175mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.