FB3G133-12PL-72
| Nominal Voltage | VDC | 12 |
| Current draw | A | 2.4±10% |
| Speed(RPM) | min-1 | 3900±5% |
| Power consumption | W | 28±10% |
| Max. Air Flow | CFM / m3 /H | 268.7/456.6 |
| Max. Static Pressure | In.wg /Pa | 1.52/380 |
50pcs
When a 133 mm backward-curved impeller is coupled to a 72 mm brushless DC rotor, the result can be a fan that moves serious air while staying below the threshold of ordinary conversation. The FB3G133-12PL-72 is exactly that: a 12 VDC, 2.4 A, 28 W centrifugal blower delivering up to 456.6 m3/h (268.7 CFM) at a maximum static pressure of 380 Pa (1.52 in.wg) and a sound pressure level of just 63 dB(A). That acoustic signature is quieter than a normal office discussion, which makes the unit suitable for medical analyzers, laboratory fume cabinets, air purifiers and residential HRV cores where noise is a specification, not an afterthought. The heart of the fan is the BLDCDC72 brushless DC motor, electronically commutated and driven by a dedicated control board that accepts a 0-10 V analog signal or a PWM input for stepless speed setting between roughly 10% and 100% of the 3900 RPM maximum. Electrical protection includes locked-rotor and over-current shutdown, reverse-polarity tolerance and soft start, while the winding system is built to Class B insulation standards and the electronics are conformally protected against humidity and dust. The impeller is molded from glass-fiber reinforced polypropylene, a material chosen for its low mass, chemical resistance and dimensional stability, and it is dynamically balanced after molding to keep vibration low at high speed. Dual ball bearings rated for 70,000 hours at 40 degrees C give the fan a long service life without maintenance, and the die-cast aluminum endcap provides a rigid, corrosion-resistant motor housing that also acts as a heat sink. With a 500 mm 20AWG lead and a 9-13.5 VDC operating window, the FB3G133-12PL-72 integrates easily into 12 V battery systems, solar-powered ventilation and compact inverter-driven equipment, and it is manufactured under ISO 9001 with CE and RoHS compliance for global OEM programs.
The FB3G133-12PL-72 is a single-inlet backward-curved centrifugal fan built around a 133 mm diameter impeller with a 72 mm rotor. The impeller is injection-molded from glass-fiber reinforced polypropylene, a composite that combines low rotational inertia with good resistance to most acids, bases and solvents encountered in ventilation and process air. The backward-curved blade profile, with a carefully chosen blade count and exit angle, produces a steep pressure-flow characteristic that resists stall and keeps the operating point stable when the system resistance rises, for example as filters load. Each impeller is balanced after molding, and the complete rotating assembly is balanced again at the factory to limit vibration and bearing load at the 3900 RPM maximum speed. The impeller is mounted directly on the motor shaft, eliminating belt losses and reducing the axial length of the fan. The motor is a BLDCDC72 three-phase brushless DC design with electronic commutation. Hall sensors provide rotor position feedback to the integrated drive board, which converts the 12 VDC supply into the three-phase waveforms required by the stator. The motor is rated 28 W and draws 2.4 A at full load, with an operating voltage window from 9 VDC to 13.5 VDC, making it compatible with nominal 12 V battery systems whose terminal voltage varies with state of charge. Speed control is implemented through a 0-10 V analog input or a 25 kHz PWM input, both referenced to signal ground, and the board also provides a tachometer output for speed monitoring and a fault output for system diagnostics. Soft start limits inrush current, while locked-rotor, over-current and over-temperature protection shut the drive down before damage occurs. Reverse polarity on the supply is tolerated without damage to the electronics. The stator winding uses Class B insulation, and the control PCB is coated to protect against condensation and airborne contaminants. Mechanically, the fan uses two pre-lubricated ball bearings rated for 70,000 hours at 40 degrees C ambient, mounted in the die-cast aluminum endcap. The aluminum housing is rigid, dimensionally stable and corrosion resistant, and it conducts heat away from the motor and drive, keeping the electronics within their rated temperature range even in enclosed equipment. The fan is supplied with a 500 mm, 20AWG cable for power and signal connections; the lead length and gauge are chosen to limit voltage drop at 2.4 A and to simplify routing inside compact chassis. The fan is designed for panel or bracket mounting with the inlet facing the equipment plenum, and it can be installed in any orientation. Typical applications include medical and laboratory analyzers, air purification and filtration units, heat-recovery ventilators, telecom cabinets, battery thermal management and compact industrial cooling, where the combination of 456.6 m3/h free delivery, 380 Pa maximum static pressure and 63 dB(A) noise allows a single fan to replace several smaller axial units. The FB3G133-12PL-72 is manufactured in an ISO 9001 certified facility and meets CE and RoHS requirements; RoHS-compliant materials are used throughout, and each unit is function-tested before shipment.
| DC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G133-12PL-72 | |
| Model | BLDCDC72 | |
| Nominal Voltage | VDC | 12 |
| Voltage range | VDC | 9 |
| Current draw | A | 2.4±10% |
| Speed(RPM) | min-1 | 3900±5% |
| Power consumption | W | 28±10% |
| Sound Pressure Level | dB(A) | 63±5% |
| Max. Air Flow | CFM / m3 /H | 268.7/456.6 |
| Max. Static Pressure | In.wg /Pa | 1.52/380 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G133-12PL-72 delivers 456.6 m3/h at 380 Pa while drawing only 28W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.