FK3G133-24PL-71
| Nominal Voltage | VDC | 24 |
| Current draw | A | 1.9±10% |
| Speed(RPM) | min-1 | 4460±5% |
| Power consumption | W | 45.6±10% |
| Max. Air Flow | CFM / m3 /H | 291.3/495 |
| Max. Static Pressure | In.wg /Pa | 1.87/468 |
50pcs
The FK3G133-24PL-71 is a 24VDC plug fan engineered for battery-powered and off-grid air movement, where low-voltage safety and miserly 45.6 W consumption matter more than brute force. Drawing only 1.9 A across a 16~28VDC window, this backward-curved centrifugal fan spins its 133 mm glass-fiber reinforced polypropylene impeller to 4460 RPM and delivers up to 291.3 CFM (495 m3H) at a maximum static pressure of 1.87 In.wg (468 Pa). The BLDCDC72 brushless DC motor runs cool and efficiently at this low power draw, making the unit a natural fit for solar ventilation skids, telecom cabinet cooling, portable air scrubbers and electric-vehicle battery enclosures where every amp-hour is budgeted. Speed is commanded through a 0-10VDC or PWM interface, so airflow can be trimmed to real-time demand rather than dumped through a damper. Electrical safety is built in: Class B insulation, reverse-polarity and locked-rotor protection, and a die-cast aluminum endcap that doubles as a heat spreader for the drive electronics. The motor's dual ball bearings are rated for 40,000 hours at 40 C, keeping maintenance intervals long in hard-to-reach installations. At 73 dB(A) the acoustic signature suits enclosure-mounted duty rather than occupied rooms. The fan conforms to CE and RoHS requirements and is produced under FANOVA's ISO 9001 quality system, with UL-recognized component options available on request.
Construction of the FK3G133-24PL-71 begins with its impeller: a 133 mm diameter backward-curved centrifugal wheel molded from glass-fiber reinforced polypropylene. The composite blades are formed in a single injection-molded hub-and-shroud assembly, giving a stiff, fatigue-resistant rotor that resists the chemical attack and moisture ingress that degrade untreated metal wheels in coastal, agricultural and process-exhaust environments. The backward-curved blade profile keeps the pressure-flow curve stable well past the best-efficiency point, so the fan does not stall when a filter loads or a duct run is throttled. The rotor is dynamically balanced to ISO 1940 G6.3 after assembly, a step that suppresses the once-per-revolution vibration that would otherwise shorten bearing life. The impeller is housed in a die-cast aluminum endcap, chosen over stamped steel for its dimensional stability, corrosion resistance and its ability to conduct heat away from the motor drive. The BLDCDC72 brushless DC motor is a three-phase permanent-magnet design with integrated commutation electronics, operated from a nominal 24VDC supply anywhere between 16 and 28VDC. At the rated point it draws 1.9 A and consumes 45.6 W while turning 4460 RPM, a combination that reflects the platform's emphasis on electrical efficiency rather than raw power. Speed control is handled through a 0-10VDC analog input or a PWM duty-cycle signal, with tachometer and alarm outputs available for system-level monitoring; the drive also provides soft-start, reverse-polarity protection and locked-rotor shutdown. Insulation is Class B, and the winding is vacuum-impregnated to resist vibration-induced abrasion. The rotor shaft runs in two pre-lubricated ball bearings selected for a rated life of 40,000 hours at 40 C ambient, mounted in rubber-isolated seats that decouple motor vibration from the aluminum housing. Electrical connection is made through a 103 mm flying lead of 20AWG cable, color-coded for supply, ground, control and tachometer signals. The complete assembly weighs in the light class typical of a 133 mm plastic-wheel plug fan and mounts through a circular panel cutout with the standard four-hole flange pattern, allowing drop-in replacement without duct rework. Every unit is run-tested for current draw, speed and pressure at the factory, and production follows the ISO 9001 quality system with CE and RoHS conformity; UL-recognized motor components can be specified for North American projects.
| DC Plug Fan | ![]() |
|
| Type | FK3G133-24PL-71 | |
| Model | BLDCDC72 | |
| Nominal Voltage | VDC | 24 |
| Voltage range | VDC | 16~28 |
| Current draw | A | 1.9±10% |
| Speed(RPM) | min-1 | 4460±5% |
| Power consumption | W | 45.6±10% |
| Sound Pressure Level | dB(A) | 73±5% |
| Max. Air Flow | CFM / m3 /H | 291.3/495 |
| Max. Static Pressure | In.wg /Pa | 1.87/468 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FK3G133-24PL-71 delivers 495 m3/h at 468 Pa while drawing only 45.6W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.