FF3G120-48GL-70
| Nominal Voltage | VDC | 48 |
| Current draw | A | 1.4±10% |
| Speed(RPM) | min-1 | 2580±5% |
| Power consumption | W | 67±10% |
| Max. Air Flow | CFM / m3 /H | 191.8/325.9 |
| Max. Static Pressure | In.wg /Pa | 1.24/310 |
50pcs
A 48VDC fan engineered around the telecom DC plant rather than the AC mains, the FF3G120-48GL-70 belongs to FANOVA's forward curved centrifugal fan family and speaks the native language of -48VDC equipment bays. Its first superpower is direct DC-bus operation: the nominal 48VDC winding accepts a 36 to 57VDC window, so the fan rides through battery discharge, equalize charging and rectifier float without a separate AC/DC converter in the cabinet. Its second superpower is ultra-low power draw: only 67 W at 2580 RPM, a figure that lets dense DCIM racks add airflow without pushing the branch circuit or the thermal budget. The 120 mm forward curved impeller is fabricated from galvanized steel sheet, giving the wheel stiffness and corrosion resistance in humid equipment rooms, while the die-cast aluminum endcap anchors the 72 mm rotor and manages motor heat. Air performance reaches 191.8 CFM (325.9 m3/h) free delivery with a maximum static pressure of 1.24 in.wg (310 Pa), enough to push through filter mats and ducted plenums in telecom shelters. Commutation is handled by the BLDCDC72 brushless DC motor with integrated electronics, driven through the standard 20AWG, 500 mm flying lead, and speed and monitoring can be tied to the site controller for DCIM-level fan management. Insulation and protection are built for continuous duty, and the bearing system is rated for long L10 life at the fan's modest thermal load. At 65 dB(A) it is quiet enough for sheltered cabinets and small equipment rooms. Typical duties include telecom rectifier cooling, outdoor cabinet ventilation, energy storage racks, LED and power electronics enclosures, and railway or off-grid DC installations. The fan is CE and RoHS compliant and is produced under FANOVA's ISO 9001 quality system in Suzhou, China.
The FF3G120-48GL-70 is a forward curved centrifugal fan built on a 120 mm diameter impeller with multi-blade forward curved geometry, the blade count and arc chosen to trade pressure rise against flow in the low-to-mid resistance band typical of electronics enclosures. Each wheel is stamped from galvanized steel sheet, and the zinc coating is retained through forming so the vane surfaces resist humid-air corrosion without a secondary paint step; the wheel is balanced after assembly to keep vibration low at the 2580 RPM design point. The rotating assembly is carried in a die-cast aluminum endcap, a single rigid housing that sets bearing alignment, conducts motor heat into the airstream and stiffens the fan against cabinet vibration. A 72 mm rotor diameter keeps inertia and starting current modest, which matters when several fans are sequenced onto one DC branch. The motor is the BLDCDC72 brushless DC platform, an electronically commutated three-phase design with integrated drive electronics, Hall sensor feedback and current limiting. It is rated at 48VDC nominal with an operating range of 36 to 57VDC, drawing 1.4 A and 67 W at full speed; within that window the fan neither stalls on low battery voltage nor over-speeds on equalize charge. Speed control is available through the control lead using a PWM or analog command, and a tachometer output supports locked-rotor and speed-loss alarms in a DCIM or site monitoring system. Electrical connection is a 20AWG, 500 mm cable, long enough to reach a terminal block in a shallow cabinet and rated for the 1.4 A load with margin; lead ends can be specified to customer termination. Air performance is 191.8 CFM (325.9 m3/h) maximum free delivery and 1.24 in.wg (310 Pa) maximum static pressure, with the operating point selectable along the published curve to match filter loading. Sound pressure is 65 dB(A) at the nominal point. Bearings are long-life lubricated ball bearings selected for horizontal or vertical mounting, with an L10 rating consistent with continuous telecom duty and a design that tolerates the 36 to 57VDC bus cycling of a rectifier plant. Insulation is Class B minimum with dielectric strength tested at 500 VDC for one minute, and the drive electronics include reverse-polarity, over-current and over-temperature protection. The fan is CE marked and RoHS compliant, and production follows FANOVA's ISO 9001 system with 100 percent run-in and curve sampling before shipment from Suzhou.
| DC Forward Curved Centrifugal Fan | ![]() |
|
| Type | FF3G120-48GL-70 | |
| Model | BLDCDC72 | |
| Nominal Voltage | VDC | 48 |
| Voltage range | VDC | 36~57 |
| Current draw | A | 1.4±10% |
| Speed(RPM) | min-1 | 2580±5% |
| Power consumption | W | 67±10% |
| Sound Pressure Level | dB(A) | 65±5% |
| Max. Air Flow | CFM / m3 /H | 191.8/325.9 |
| Max. Static Pressure | In.wg /Pa | 1.24/310 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FF3G120-48GL-70 delivers 325.9 m3/h at 310 Pa while drawing only 67W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 120mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 120mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.