EN
FB3G190-24PL-90
| Nominal voltage | VDC | 24 |
| Paggamit ng kuryente | A | 7.3 |
| Bilis(rpm) | min -1 | 4300 |
| Konsumo ng Kuryente | W | 175 |
| Pinakamataas na Daloy ng Hangin | CFM / m 3 /H | 531/902 |
| Pinakamataas na Static Pressure | In.wg /Pa | 3.21/803 |
50pcs
The FB3G190-24PL-90 is the highest-power 190mm DC backward curved centrifugal fan in the lineup, delivering 902 m³/h (531 CFM) at an impressive 803 Pa from a 24VDC supply. Its BLDC92 brushless motor produces 175W at 4300 RPM—substantially more power than the 175mm class—making it the go-to choice for 24VDC applications demanding both high flow and significant static pressure: telecom shelter pressurization, long-duct air handling, high-resistance filtration, and industrial process cooling. The 190mm swept area moves substantially more air per revolution than smaller form factors. 0-10VDC/PWM speed control with FG tach (3 pulse/rev). CE, RoHS, ISO9001, ErP2026 certified with 50,000-hour L10 bearing life.
At the core of the FB3G190-24PL-90 is the BLDC92 permanent magnet brushless external rotor motor—the most powerful in the 190mm series—delivering 175W of shaft power while drawing 7.3A from a 24VDC supply. The wide 16~28 VDC input accommodates lead-acid battery banks during charge cycles and regulated supplies alike. The motor drives a 7-blade 190mm glass-fiber reinforced PP impeller at 4300 RPM to generate 902 m³/h at 803 Pa—suitable for applications where both high flow and significant system resistance must be overcome simultaneously. The integrated controller provides comprehensive self-protection: soft-start, current limitation, under/over voltage detection, independent thermal overload for motor and electronics, locked-rotor, and reverse polarity. The die-cast aluminum housing provides IP44 protection and effective heat dissipation. Ball bearings support any-angle mounting with 50,000+ hour L10 service life at 40°C. CE, RoHS, ISO9001, ErP2026 and EN ISO 12100, EN 60204-1, EMC compliant.
| DC Backward Centrifugal Fan |  |
|
| Type | FB3G190-24PL-90 | |
| Model | BLDC92 | |
| Nominal voltage | VDC | 24 |
| Voltage range | VDC | 16~28 |
| Paggamit ng kuryente | A | 7.3 |
| Bilis(rpm) | min -1 | 4300 |
| Konsumo ng Kuryente | W | 175 |
| Sound Pressure Level | dB(A) | 73 |
| Pinakamataas na Daloy ng Hangin | CFM / m 3 /H | 531/902 |
| Pinakamataas na Static Pressure | In.wg /Pa | 3.21/803 |
| Insulation class | ~ | Klase B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |
Remarks:
I. Standard cable length. Customizable.
II. 0-10V/PWM control. Modbus RTU RS485 optional.
Test condition:
I. Specified environment and installation mode.
II. Input Voltage---Operating voltage.
III. Temperature---Room 25°C.
IV. Humidity---65%RH.
I. When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
II. Do not plug or unplug the fan lead plug when the fan is running
III. If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
IV. Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
V. The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
VI. If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
VII. As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. 175W Class-Leading Power: The most powerful 190mm DC fan available. 902 m³/h at 803 Pa from 24VDC—handles applications that would require two smaller fans or a jump to AC power. The 7.3A draw at 24V is well within the capability of standard DC distribution and battery banks.
2. 803 Pa High Static Pressure: Engineered for systems with substantial resistance: long duct runs exceeding 30 meters, HEPA filter banks, multi-branch air distribution, and industrial process cooling where pressure drop is the primary design constraint. Delivers 902 m³/h even against 803 Pa of back pressure.
3. 190mm Large Frame: The 190mm impeller provides a significantly larger swept area than 133mm or 175mm alternatives, moving more air per revolution. Ideal for high-volume applications where a single large fan is preferred over multiple smaller units for reliability and installation simplicity.
4. Comprehensive Protection: Soft-start, current limitation, under/over voltage (16~28 VDC), dual thermal overload for motor and electronics, locked-rotor, reverse polarity. FG tach (3 pulse/rev) for real-time RPM monitoring and closed-loop control.
5. Certified & Durable: CE, RoHS, ISO9001, ErP2026 with EN ISO 12100, EN 60204-1, EMC. Die-cast aluminum housing, IP44, ball bearings 50,000+ hr L10. OEM/ODM with custom voltage, connectors, cables. 7-day samples, 14-21 day production.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2:Will you provide samples?
A2: Sample is available and can be delivered within 7 days for standard models
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI, pay deposit, then we will arrange the production. After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.
