EN
FB3G225-2APL-90
| Nominell spänning | VAC | 230 |
| Aktuell uttag | A | 1.1 |
| Hastighet(rpm) | min -1 | 3050 |
| Energiförbrukning | W | 150 |
| Max. luftflöde | CFM / m 3 /H | 885/1504 |
| Max. Statiskt Tryck | In.wg /Pa | 2.4/600 |
50 st
The FB3G225-2APL-90 is the largest EC backward curved centrifugal fan in the FANOVA lineup, featuring a commanding 225mm impeller that delivers 1504 m³/h (885 CFM) at 600 Pa from standard 230VAC single-phase power. Its BLEC92 motor produces 150W at 3050 RPM while drawing just 1.1A—achieving an impressive 10 m³/h per watt efficiency at a manageable 71 dB(A). As the largest single-fan EC solution available, it is the definitive choice for large-scale air handling, central HVAC systems, factory ventilation, agricultural tunnel air circulation, and any application where maximum airflow from a single fan is the primary design objective. 0-10VDC/PWM speed control with FG tach (3 pulse/rev). CE, RoHS, ISO9001, ErP2026 certified with 50,000-hour L10 bearing life.
The FB3G225-2APL-90 represents the pinnacle of the FANOVA EC backward curved centrifugal fan range. Its BLEC92 external rotor motor draws just 1.1A at 230VAC to produce 150W, driving the largest 7-blade 225mm glass-fiber reinforced PP impeller at 3050 RPM to generate 1504 m³/h at 600 Pa—the highest airflow of any single FANOVA EC fan. The 50/60 dual-frequency compatibility and 184~277 VAC wide input tolerance ensure consistent operation across diverse grid conditions. The die-cast aluminum housing provides IP44 protection and effective heat dissipation for the larger motor. Full protection: soft-start, current limitation, under/over voltage, thermal overload, locked-rotor, reverse polarity. Ball bearings 50,000+ hr L10. CE, RoHS, ISO9001, ErP2026 and EN ISO 12100, EN 60204-1, EMC compliant.
| EC Backward Centrifugal Fan |  |
|
| Type | FB3G225-2APL-90 | |
| Model | BLEC92 | |
| Phase | ~ | 1~ |
| Nominell spänning | VAC | 230 |
| Frequency | Hz | 50/60 |
| Voltage range | VAC | 184~277 |
| Aktuell uttag | A | 1.1 |
| Hastighet(rpm) | min -1 | 3050 |
| Energiförbrukning | W | 150 |
| Sound Pressure Level | dB(A) | 71 |
| Max. luftflöde | CFM / m 3 /H | 885/1504 |
| Max. Statiskt Tryck | In.wg /Pa | 2.4/600 |
| Insulation class | ~ | Klass B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |
Remarks:
I. Standard cable length. Customizable.
II. 0-10V/PWM control. Modbus RTU RS485 optional.
Test condition:
I. Specified environment and installation mode.
II. Input Voltage---Operating voltage.
III. Temperature---Room 25°C.
IV. Humidity---65%RH.
I. When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
II. Do not plug or unplug the fan lead plug when the fan is running
III. If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
IV. Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
V. The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
VI. If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
VII. As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. Largest FANOVA EC Centrifugal: The 225mm impeller is the largest in the EC backward curved lineup. 1504 m³/h from a single fan—replaces 2-3 smaller units for large-scale air handling, central HVAC, factory ventilation, and agricultural tunnel circulation. One fan means one installation, one controller, one maintenance point.
2. 10 m³/h per Watt Efficiency: At 150W and 1504 m³/h, the FB3G225-2APL-90 achieves exceptional aerodynamic efficiency. Drawing just 1.1A from standard 230VAC single-phase, it delivers large-fan airflow without requiring three-phase power or dedicated circuits.
3. Effective 71 dB(A): Despite its size and 1504 m³/h output, the FB3G225-2APL-90 operates at a manageable 71 dB(A)—achieved through the large impeller running at a moderate 3050 RPM rather than a smaller fan screaming at high speed.
4. 600 Pa Static Pressure: Sufficient for ducted commercial HVAC systems, industrial extraction, and multi-outlet distribution networks. The large impeller generates substantial pressure without excessive RPM.
5. Certified & Durable: CE, RoHS, ISO9001, ErP2026 with EN ISO 12100, EN 60204-1, EMC. Die-cast aluminum, IP44, ball bearings 50,000+ hr L10. OEM/ODM. 7-day samples, 14-21 day production.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2:Will you provide samples?
A2: Sample is available and can be delivered within 7 days for standard models
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI, pay deposit, then we will arrange the production. After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.
