EN
FB3G190-80PL-90
| Նոմինալ լարման | VDC | 80 |
| Էլեկտրական հաղորդում | Ա | 2.25 |
| Արագություն (rpm) | նվազագույն -1 | 4300 |
| Էլեկտրաէներգիայի սպառում | Լայն | 180 |
| Առավելագույն օդային հոսք | CFM / մ 3 /H | 488/829 |
| Առավելագույն ստատիկ ճնշում | In.wg /Pa | 3.21/803 |
50հտ
The FB3G190-80PL-90 is engineered for 80VDC high-voltage DC distribution systems, delivering 829 m³/h (488 CFM) at 803 Pa from a 190mm impeller. Its BLDC92 motor produces 180W at 4300 RPM while drawing just 2.25A—less than one-third the current of an equivalent 24VDC fan. This makes it ideal for telecom central office DC plants, data center DC power distribution, and high-voltage battery systems where 80VDC bus voltage minimizes distribution losses and cable sizing requirements. The wide 60~143 VDC input handles DC bus voltage variations. 0-10VDC/PWM speed control with FG tach (3 pulse/rev). CE, RoHS, ISO9001, ErP2026 certified with 50,000-hour L10 bearing life.
The FB3G190-80PL-90 operates on 80VDC—a standard voltage in telecom central office -48V DC plants (with DC-DC conversion) and emerging high-voltage DC data center architectures. Drawing just 2.25A at 180W, it achieves the same power output as the 24V model (7.3A) at less than one-third the current. The BLDC92 motor drives the 7-blade 190mm glass-fiber reinforced PP impeller at 4300 RPM to generate 829 m³/h at 803 Pa. The wide 60~143 VDC input range accommodates DC bus voltage fluctuations. Die-cast aluminum housing with IP44. Protection: soft-start, current limitation, under/over voltage, thermal overload, locked-rotor, reverse polarity. Ball bearings 50,000+ hr L10. CE, RoHS, ISO9001, ErP2026 and EN ISO 12100, EN 60204-1, EMC compliant.
| DC Backward Centrifugal Fan |  |
|
| Type | FB3G190-80PL-90 | |
| Model | BLDC92 | |
| Նոմինալ լարման | VDC | 80 |
| Voltage range | VDC | 60~143 |
| Էլեկտրական հաղորդում | Ա | 2.25 |
| Արագություն (rpm) | նվազագույն -1 | 4300 |
| Էլեկտրաէներգիայի սպառում | Լայն | 180 |
| Sound Pressure Level | dB(A) | 77 |
| Առավելագույն օդային հոսք | CFM / մ 3 /H | 488/829 |
| Առավելագույն ստատիկ ճնշում | In.wg /Pa | 3.21/803 |
| Insulation class | ~ | Բաժին B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |
Remarks:
I. Standard cable length. Customizable.
II. 0-10V/PWM control. Modbus RTU RS485 optional.
Test condition:
I. Specified environment and installation mode.
II. Input Voltage---Operating voltage.
III. Temperature---Room 25°C.
IV. Humidity---65%RH.
I. When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
II. Do not plug or unplug the fan lead plug when the fan is running
III. If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
IV. Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
V. The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
VI. If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
VII. As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. 80VDC High-Voltage Efficiency: Operating at 80VDC, the FB3G190-80PL-90 draws just 2.25A for 180W output—less than one-third the current of a 24VDC equivalent. Smaller conductors, lower I²R losses, and reduced voltage drop over long cable runs. Ideal for telecom DC plants, data center DC distribution, and high-voltage battery systems.
2. Wide 60~143VDC Input: The 60~143 VDC input range accommodates diverse high-voltage DC architectures including 80V nominal, 110V battery systems, and DC bus variations. Built-in under/over voltage protection ensures safe operation across the full range.
3. 180W Industrial Output: Delivers 829 m³/h at 803 Pa—handling long duct runs, high-resistance filtration, and multi-outlet systems. The 190mm impeller provides a larger swept area than 175mm alternatives for higher volume flow.
4. Comprehensive Protection: Soft-start, current limitation, under/over voltage, dual thermal overload, locked-rotor, reverse polarity. FG tach (3 pulse/rev). Die-cast aluminum, IP44, ball bearings 50,000+ hr L10.
5. Certified & Flexible: CE, RoHS, ISO9001, ErP2026 with EN ISO 12100, EN 60204-1, EMC. OEM/ODM with custom voltage, connectors, cables. 7-day samples, 14-21 day production.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2:Will you provide samples?
A2: Sample is available and can be delivered within 7 days for standard models
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI, pay deposit, then we will arrange the production. After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.
