EN
FB3G220-2APL-90
| Tensión nominal | VACACIONES | 230 |
| Consumo de corriente | A | 1.1 |
| Velocidad (rpm) | mínimo -1 | 3600 |
| Consumo de energía | A | 170 |
| Caudal máximo de aire | CFM / m 3 /H | 758/1288 |
| - ¿Qué quieres? Presión estática | Pulg. cda / Pa | 2.8/700 |
50 piezas
The FB3G220-2APL-90 is a large-frame 220mm EC backward curved centrifugal fan delivering 1288 m³/h (758 CFM) at 700 Pa from standard 230VAC single-phase power. Its BLEC92 motor produces 170W at 3600 RPM while drawing just 1.1A—providing substantial airflow and pressure capability on standard circuits. The 220mm impeller provides the largest swept area in the FANOVA EC centrifugal lineup, making it the ideal single-fan solution for large air handlers, central ventilation systems, industrial process cooling, and agricultural ventilation where one large fan is preferred over multiple smaller units. 0-10VDC/PWM speed control with FG tach (3 pulse/rev). CE, RoHS, ISO9001, ErP2026 certified with 50,000-hour L10 bearing life.
The FB3G220-2APL-90 features a BLEC92 external rotor EC motor engineered for efficient 230VAC single-phase operation at 50/60. Drawing just 1.1A to produce 170W, it drives the 7-blade 220mm glass-fiber reinforced PP impeller at 3600 RPM to generate 1288 m³/h at 700 Pa. The large impeller diameter moves significantly more air per revolution than smaller frames, achieving high airflow at moderate RPM for reduced noise and improved efficiency. The wide 184~277 VAC input handles grid voltage variations. Die-cast aluminum housing with IP44. Full protection: soft-start, current limitation, under/over voltage, thermal overload, locked-rotor, reverse polarity. Ball bearings 50,000+ hr L10. CE, RoHS, ISO9001, ErP2026 and EN ISO 12100, EN 60204-1, EMC compliant.
| EC Backward Centrifugal Fan |  |
|
| Type | FB3G220-2APL-90 | |
| Model | BLEC92 | |
| Phase | ~ | 1~ |
| Tensión nominal | VACACIONES | 230 |
| Frequency | Hz | 50/60 |
| Voltage range | VACACIONES | 184~277 |
| Consumo de corriente | A | 1.1 |
| Velocidad (rpm) | mínimo -1 | 3600 |
| Consumo de energía | A | 170 |
| Sound Pressure Level | dB(A) | 76 |
| Caudal máximo de aire | CFM / m 3 /H | 758/1288 |
| - ¿Qué quieres? Presión estática | Pulg. cda / Pa | 2.8/700 |
| Insulation class | ~ | Clase B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |
Remarks:
I. Standard cable length. Customizable.
II. 0-10V/PWM control. Modbus RTU RS485 optional.
Test condition:
I. Specified environment and installation mode.
II. Input Voltage---Operating voltage.
III. Temperature---Room 25°C.
IV. Humidity---65%RH.
I. When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
II. Do not plug or unplug the fan lead plug when the fan is running
III. If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
IV. Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
V. The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
VI. If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
VII. As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. Largest Frame 220mm: The 220mm impeller provides the largest swept area in the FANOVA EC centrifugal lineup. 1288 m³/h at 700 Pa from a single fan—replaces multiple smaller fans for large air handlers, central ventilation, and industrial process cooling. One fan means one installation, one control point, one maintenance schedule.
2. 170W on Standard 230VAC: Drawing just 1.1A at 230VAC, the FB3G220-2APL-90 delivers 170W of airflow power on standard single-phase circuits without requiring dedicated wiring or three-phase power. 50/60 dual-frequency compatibility for European and Asian installations.
3. 700 Pa Static Pressure: Sufficient for long duct runs, commercial HVAC distribution networks, and industrial extraction systems. The large impeller achieves this pressure at a moderate 3600 RPM, balancing performance with acceptable noise levels.
4. Comprehensive Protection: Soft-start, current limitation, under/over voltage, thermal overload, locked-rotor, reverse polarity. FG tach (3 pulse/rev) for closed-loop speed control. 184~277 VAC wide input tolerance.
5. Certified & Durable: CE, RoHS, ISO9001, ErP2026 with EN ISO 12100, EN 60204-1, EMC. Die-cast aluminum, IP44, ball bearings 50,000+ hr L10. OEM/ODM. 7-day samples, 14-21 day production.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2:Will you provide samples?
A2: Sample is available and can be delivered within 7 days for standard models
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI, pay deposit, then we will arrange the production. After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.
